OPeNDAP Data Access Form for fvcom_ugrid.nc
OPeNDAP Logo
Welcome to the
OPeNDAP DAP2 Data Access Form

dataset: fvcom_ugrid.nc




  • NC_GLOBAL
    • title: Special Case
    • institution: School for Marine Science and Technology
    • source: FVCOM_3.0
    • history: model started at: 17/10/2008 12:00
    • references: http://fvcom.smast.umassd.edu, http://codfish.smast.umassd.edu
    • Conventions: CF-1.4
    • CoordinateSystem: Cartesian
    • CoordinateProjection: proj=tmerc +datum=NAD83 +lon_0=-70d10 lat_0=42d50 k=.9999666666666667 x_0=900000 y_0=0 no_defs
    • Tidal_Forcing: Spectral Tidal Forcing Components: M2
    • River_Forcing: THERE ARE 1 RIVERS IN THIS MODEL. RIVER INFLOW IS ON THE nodes WHERE TEMPERATURE AND SALINITY ARE specified IN THE MODEL. THE FOLLOWING RIVER NAMES ARE USED: myriver
    • GroundWater_Forcing: GROUND WATER FORCING IS OFF!
    • Surface_Heat_Forcing: SURFACE HEAT FORCING IS OFF
    • Surface_Wind_Forcing: SURFACE WIND FORCING IS OFF
    • Surface_PrecipEvap_Forcing: SURFACE PRECIPITATION FORCING IS OFF
    • Special_Physical_processes: long shore flow adjustment for thermal wind and wind driven setup
  • DODS_EXTRA
    • Unlimited_Dimension: time


nprocs(Type is Int32)
  • attributes
    • long_name: number of processors
x[ node= 0 ..870] (Type is Float32)
  • attributes
    • long_name: nodal x-coordinate
    • units: meters
y[ node= 0 ..870] (Type is Float32)
  • attributes
    • long_name: nodal y-coordinate
    • units: meters
lon[ node= 0 ..870] (Type is Float32)
  • attributes
    • long_name: nodal longitude
    • standard_name: longitude
    • units: degrees_east
lat[ node= 0 ..870] (Type is Float32)
  • attributes
    • long_name: nodal latitude
    • standard_name: latitude
    • units: degrees_north
xc[ nele= 0 ..1619] (Type is Float32)
  • attributes
    • long_name: zonal x-coordinate
    • units: meters
yc[ nele= 0 ..1619] (Type is Float32)
  • attributes
    • long_name: zonal y-coordinate
    • units: meters
lonc[ nele= 0 ..1619] (Type is Float32)
  • attributes
    • long_name: zonal longitude
    • standard_name: longitude
    • units: degrees_east
latc[ nele= 0 ..1619] (Type is Float32)
  • attributes
    • long_name: zonal latitude
    • standard_name: latitude
    • units: degrees_north
siglay[ siglay= 0 ..9] [ node= 0 ..870] (Type is Float32)
  • attributes
    • long_name: Sigma Layers
    • standard_name: ocean_sigma/general_coordinate
    • positive: up
    • valid_min: -1.00000000
    • valid_max: 0.00000000
    • formula_terms: sigma: siglay eta: zeta depth: h
siglev[ siglev= 0 ..10] [ node= 0 ..870] (Type is Float32)
  • attributes
    • long_name: Sigma Levels
    • standard_name: ocean_sigma/general_coordinate
    • positive: up
    • valid_min: -1.00000000
    • valid_max: 0.00000000
    • formula_terms: sigma:siglay eta: zeta depth: h
siglay_center[ siglay= 0 ..9] [ nele= 0 ..1619] (Type is Float32)
  • attributes
    • long_name: Sigma Layers
    • standard_name: ocean_sigma/general_coordinate
    • positive: up
    • valid_min: -1.00000000
    • valid_max: 0.00000000
    • formula_terms: sigma: siglay_center eta: zeta_center depth: h_center
siglev_center[ siglev= 0 ..10] [ nele= 0 ..1619] (Type is Float32)
  • attributes
    • long_name: Sigma Levels
    • standard_name: ocean_sigma/general_coordinate
    • positive: up
    • valid_min: -1.00000000
    • valid_max: 0.00000000
    • formula_terms: sigma:siglay_center eta: zeta_center depth: h_center
h_center[ nele= 0 ..1619] (Type is Float32)
  • attributes
    • long_name: Bathymetry
    • standard_name: sea_floor_depth_below_geoid
    • units: m
    • positive: down
    • grid: grid1, grid3
    • coordinates: latc, lonc
    • grid_location: center
zeta_center[ time= 0 ..7] [ nele= 0 ..1619] (Type is Float32)
  • attributes
    • long_name: Water Surface Elevation
    • units: meters
    • positive: up
    • standard_name: sea_surface_height_above_geoid
    • grid: grid1, grid2
    • coordinates: lat, lon
    • grid_location: center
h[ node= 0 ..870] (Type is Float32)
  • attributes
    • long_name: Bathymetry
    • standard_name: sea_floor_depth_below_geoid
    • units: m
    • positive: down
    • grid: grid1, grid3
    • coordinates: lat, lon
    • grid_location: node
grid1[ three= 0 ..2] [ nele= 0 ..1619] (Type is Int32)
  • attributes
    • cell_type: tri_ccw
    • standard_name: connectivity_array
    • coordinates_node: lon, lat
    • index_origin: 1
grid2[ three= 0 ..2] [ nele= 0 ..1619] (Type is Int32)
  • attributes
    • cell_type: tri_ccw
    • index_start: 0
    • standard_name: connectivity_array
    • coordinates_node: lon, lat, zeta
grid3[ three= 0 ..2] [ nele= 0 ..1619] (Type is Int32)
  • attributes
    • cell_type: tri_ccw
    • index_start: 0
    • standard_name: connectivity_array
    • coordinates_node: lon, lat, h
grid4[ three= 0 ..2] [ nele= 0 ..1619] (Type is Int32)
  • attributes
    • cell_type: tri_ccw
    • index_start: 0
    • standard_name: connectivity_array
    • coordinates_node: lon, lat, siglay
    • coordinates_cell: lonc, latc, siglay_center
grid5[ three= 0 ..2] [ nele= 0 ..1619] (Type is Int32)
  • attributes
    • cell_type: tri_ccw
    • standard_name: connectivity_array
    • coordinates_node: lon, lat, siglev
    • coordinates_cell: lonc, latc, siglev_center
    • index_origin: 1
iint[ time= 0 ..7] (Grid of Int32 values)
  • attributes
    • long_name: internal mode iteration number
time[ time= 0 ..7] (Type is Float32)
  • attributes
    • long_name: time
    • units: days since 2008-01-01 00:00:00
    • time_zone: none
Itime[ time= 0 ..7] (Grid of Int32 values)
  • attributes
    • units: days since 0.0
    • time_zone: none
Itime2[ time= 0 ..7] (Grid of Int32 values)
  • attributes
    • units: msec since 00:00:00
    • time_zone: none
zeta[ time= 0 ..7] [ node= 0 ..870] (Type is Float32)
  • attributes
    • long_name: Water Surface Elevation
    • units: meters
    • positive: up
    • standard_name: sea_surface_height_above_geoid
    • grid: grid1
    • coordinates: time lat lon
    • grid_location: node
u[ time= 0 ..7] [ siglay= 0 ..9] [ nele= 0 ..1619] (Type is Float32)
  • attributes
    • long_name: East Velocity Component
    • standard_name: eastward_sea_water_velocity
    • units: m s-1
    • grid: grid5
    • grid_location: center
    • coordinates: time siglay latc lonc
v[ time= 0 ..7] [ siglay= 0 ..9] [ nele= 0 ..1619] (Type is Float32)
  • attributes
    • long_name: North Velocity Component
    • standard_name: Northward_sea_water_velocity
    • units: m s-1
    • grid: grid5
    • grid_location: center
    • coordinates: time siglay latc lonc
temp[ time= 0 ..7] [ siglay= 0 ..9] [ node= 0 ..870] (Type is Float32)
  • attributes
    • long_name: temperature
    • standard_name: sea_water_potential_temperature
    • units: degC
    • grid: grid4
    • coordinates: lon, lat, siglay
    • grid_location: node
salinity[ time= 0 ..7] [ siglay= 0 ..9] [ node= 0 ..870] (Type is Float32)
  • attributes
    • long_name: salinity
    • standard_name: sea_water_salinity
    • units: 1e-3
    • grid: grid4
    • coordinates: lon, lat, siglay
    • grid_location: node

debug
Hyrax development sponsored by NSF, NASA, and NOAA

OPeNDAP Hyrax (1.16.8-383)
Documentation Questions? Contact Support